What is the compensating presser foot for Juki

The JUKI Compensating Presser Feet is a special sewing machine accessory with specific functions and usage methods:

There are many functions:

Keep the stitches stable: During the sewing process, when the fabric thickness is uneven or there are multiple layers of fabric, the compensation foot can automatically adjust the pressure to ensure uniform and stable stitches. For example, when sewing necklines, cuffs and other parts of clothes, the number of fabric layers in these places may suddenly increase. The compensation foot can adapt to this change so that the stitches sewn will not have problems such as skipping or breakage. 

Suitable for sutures of different thicknesses: Whether it is a thin suture or a thick suture, the compensation foot can be adjusted accordingly according to the thickness of the suture to ensure that the suture can pass through the fabric smoothly and form a neat line on the fabric. trace.

There are many types  :

According to the offset direction:

Left offset compensation foot: Mainly used to offset the fabric to the left by a certain distance during sewing. The offset distance is usually small, such as about 1.5 mm. This type of compensation foot is suitable for situations where specific sewing effects are required on the edge of the fabric. For example, when sewing decorative edge lines, you can use the left offset compensation foot to move the stitches slightly to the left, increasing the Uniqueness of design.

Right offset compensation foot: Contrary to the left offset compensation foot, the right offset compensation foot will offset the fabric to the right by a certain distance and is often used when precise sewing on the right side of the fabric is required. For example, when sewing some fabrics with specific patterns or textures, in order to make the positional relationship between the stitches and the pattern more accurate, you can use the right offset compensation foot.According to applicable models: Different JUKI sewing machine models may require the use of specific models of compensation presser feet, such as those suitable for JUKI TL series, J-150 QVP and other models.

How to use:

Installation: First turn off the power of the sewing machine, then remove the original presser foot according to the instructions of the sewing machine, then correctly install the compensation foot to the presser foot bar of the sewing machine, and tighten the fixing screws to ensure that the presser foot is firmly installed.

Adjustment: Adjust the stitch length, width, tension and other parameters of the sewing machine according to the fabric and needs of the sewing. For the compensation presser foot, it may be necessary to adjust the pressure of the presser foot according to the thickness of the fabric and the requirements of the sewing effect. Generally speaking, when the fabric is thicker, the pressure of the presser foot needs to be increased; when the fabric is thin, the pressure of the presser foot needs to be appropriately reduced.

Sewing: Place the fabric on the needle plate of the sewing machine, so that the part to be sewn is under the needle, and align the edge of the fabric with the guide part of the compensation foot. Then, gently depress the foot pedal of the sewing machine and start sewing. During the sewing process, keep the fabric flat and stable to avoid movement or distortion of the fabric.

Check and adjust: After sewing for a certain distance, stop the sewing machine and check the quality of the stitches and the sewing effect. If you find problems such as uneven stitches, skipped threads or broken threads, you need to check whether the presser foot is installed correctly, whether the pressure is appropriate, and whether other parameters of the sewing machine are set correctly, and make adjustments according to the actual situation.